A516Gr65 carbon steel plates are intended primarily for service in welded pressure vessels where improved notch toughness is important. They are widely used in the fabrication of boilers in industries such as shipbuilding, petrochemical and manufacturing.
ASTM A516 Grade 65 boiler steel plate owned a higher yield strength and tensile strength comparing with boiler steel plate A516 Grade 55 and A516 Grade 60.Now Katalor can offer the maximum thickness 400mm for boiler steel plate A516 Grade 65,this is the most heavy in China.The unit weight can reach till 30 tons.Besides Ultrasonic examination,charpy V-notch impact test and simulated post-weld heat treatment of mechanical coupons shall be chosed by the end users when ordered these pressure vessel steel plates A516 Grade 65.
|
Yield strength (Mpa)
|
Tensile strength (Mpa)
|
Elongation in ≥,%
|
|
240
|
450-585
|
200mm
|
50mm
|
|
19
|
23
|
The A 516 Grade 65 Chemical is max composition of product analysis:
|
Grade
|
C %
|
Si %
|
Mn %
|
P %
|
S %
|
|
A516 Gr 65
|
0.24-0.29
|
0.13-0.45
|
0.79-1.3
|
0.035
|
0.035
|
A516 Grade 65 steel is a carbon pressure vessel steel grade for moderate and lower temperature service for a variety of applications in the Petrochemical, Chemical, Oil & Gas Industries
A516 Grade 65 steel usual request normalized if thickness above 40mm, if not, Katalor usual delivery in hot rolled or control rolled station. A 516 Gr.65+N or A516gr65N mean that steel grade must be normalized in any thickness.
Shanghai Katalor Industry Co., Ltd Is specialized in the production of steel plate, steel pipe, steel bar, it is located in Shanghai, with advanced technology and services, if you need ASTM A516 Grade 65 steel, please give us a message. TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:info@katalor.com
Skype:katalor
Phone:0086-18317160019
