A573 Gr. 58 steel is a improved toughness carbon steel plate. The upper limit of manganese for Gr.58 may be exceeded, provided that the carbon content plus 1/6 manganese content does not exceed 0.40% based on heat analysis.
Additional technical services for A573 Grade 58 ASTM Common carbon structural steel plate from Katalor which including Heat treatment(Normalized,TMCP,Quenched and Tempered,N+T),Z-test (Z15,Z25,Z35),Ultrasonic Examination,Low temperature impacting test,DWTT,PWHT and cutting&welding into special pieces for end users. Mill test certificate issued under EN 10204 format.
Steel Standard:ASTM A573/A573M
Rolling Type:Mild steel plate,Carbon steel coil
Thickness:6mm-650mm
Width:1500mm-4200mm
Length:3000mm-18000mm
Chemical composition % of the Product analysis
|
C |
Mn |
P |
S |
Si |
|
0.23 |
0.60-0.90 |
0.035 |
0.04 |
0.10-0.35 |
Table for yield and tensile strength lsit:
|
Grade |
Thickness(mm) |
Min Yield (Mpa) |
Tensile(MPa) |
Elongation(%) |
|
A573 Gr.58 |
6mm-40mm |
220Mpa |
400-490Mpa |
24% |
|
40mm-100mm |
… |
… |
… |
|
|
The min impact energy is longitudinal energy |
||||
About mechanical property for carbon steel plate A573 Gr.58 ,the minimum yield strength shall above 220 Mpa and tensile strength shall within 400-490 Mpa.Main application of ASTM A573 Grade 58 is firstly and largely producing structural parts of the bolted and welded steel industrial area.
Shanghai Katalor Industry Co., Ltd supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry, with advanced technology and services, if you need ASTM A573 Grade 58 steel, please give us a message.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:info@katalor.com
Skype:katalor
Phone:0086-18317160019
