Ust37-2 is a kind steel grade in steel standard DIN 17100. Ust37-2 steel is carbon structural steel plate which is very common used. U is for rimming. DIN17100 standard applies to steel sections (including wide flange beams),steel bars, wire rod, flat products (strip, plate, wide flats) seamless and welded,square and rectangular hollow sections, forgings and semi-finished products in the general structural steels.
When rolling carbon steel plate Ust37-2, it is permissible to exceed the maximum value indicated, provided a phosphorous content per 0.001% N of 0.005% P below the maximum value indicated is maintained.The nitrogen content may not, however, exceed a value of 0.0012%N in the ladle analysis and 0.0014%N in the sample analysis.
Specification:Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm
Chemical composition for Ust37-2 Mild steel (Product Analysis Max%)
|
Main chemical elements composition of Ust37-2 |
||||||
|
Thickness(mm) |
C |
Si |
Mn |
P |
S |
N |
|
T≤16 |
0.21 |
0.60 |
1.70 |
0.065 |
0.065 |
0.009 |
|
T>16 |
0.25 |
|||||
Mechanical properties of DIN 17100 grade USt 37-2 steel (1.0036)
|
Nominal thickness (mm) |
<16 |
16-40 |
40-63 |
63-80 |
80-100 |
>100 |
|
ReH - Minimum yield strength (MPa) |
235 |
225 |
215 |
205 |
195 |
- |
|
Nominal thickness (mm) |
<3 |
3-100 |
100-200 |
|
Rm -Tensile strength (MPa) |
360-510 |
340-470 |
- |
|
Nominal thickness (mm) |
3-40 |
40-63 |
63 - 100 |
>100 |
|
A - Minimum elongation Lo =5do |
26 |
25 |
24 |
- |
we can put the USt37-2 order to our steel mill directly or collect these goods from our stock directly, we also can cut or fabricate these goods as our customer requirement. if you want to know more about the USt 37-2 steel plate, please contact us.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:info@katalor.com
Phone:0086-18317160019
