Main Application:
EN10025-5 S355K2W Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel, Boiler, storage Tanks and Heat Exchanger in Oil,Gas Project
Supply S355K2W (1.8967) EN10025-5 steel plate
|
S355K2W (1.8967) wuyang steel, shougang steel, xinyu steel |
|
|
Specification: |
Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm |
|
Standard: |
EN 10025 -5 : 2004 Technical delivery conditions for structural steel with improved atmospheric corrosion resistance |
|
Approval By Third Party |
ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE |
|
Classification: |
structural steel with improved atmospheric corrosion resistance |
Steel name:
EN10025-5 S355K2W Boiler steel plate,EN10025-5 S355K2W Pressure Vessel Steel plate, EN10025-5 S355K2W Storage Tanks Steel plate. EN10025-5 S355K2W Heat Exchanger Steel Plate .
|
Grade |
Mechanical Property |
|||
|
Tensile Strength(MPa) |
Yield Strength(MPa) |
% Elongation in 2 in.(50mm) min |
Impacting Test Temperature(°C) |
|
|
510 |
355 |
16 |
+20,0,-20 |
|
Chemical composition % of the Product analysis of grade S355K2W (1.8967)
FN = rimming steels not permitted; FF = fully killed steel (see 6.2.2).
For long products the P and S content can be 0,005 % higher.
The steels shall contain at least one of the following elements: Al total ≥ 0,020 %, Nb: 0,015 - 0,060 %, V: 0,02 - 0,12 %, Ti: 0,02 - 0,10 %. If these elements are used in combination, at least one of them shall be present with the minimum content indicated.
It is permissible to exceed the specified values provided that for each increase of 0,001 % N the P max. content will be reduced by 0,005 %; the N content of the ladle analysis, however, shall not be more than 0,012 %.
The steels may show a Ni content of max. 0,65 %.
The steels may contain max. 0,30 % Mo and max. 0,15 % Zr.
The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0,020 % or if sufficient other N binding elements are present. The N binding elements shall be mentioned in the inspection document
|
Method of deoxidation |
C |
Si |
Mn |
P |
S |
Cr |
N |
Cu |
|
FF |
max 0.19 |
max 0.55 |
0,45 - 1,60 |
max. 0,035 |
0,035 |
0,35 - 0,85 |
0,010 |
0,20 - 0,60 |
Shanghai Katalor Industry Co., Ltd Is specialized in the production of steel plate, steel pipe, steel bar, it is located in Shanghai, with advanced technology and services, if you need EN10025-5 S355K2W steel, please give us a message.
