Shanghai Katalor Enterprises Co., Ltd
TEL : 0086-21-61182423   SKYPE :SHANGHAI.KATALOR  E-mail : service1@katalor.com
shanghai > Boilers and Pressure Vessels steel > Views
EN10025-5 S355K2W Pressure Vessel Steel plate
Further information
You need Further information or have question
0086-21-61182423
0086-21-61182424
info@katalor.com

EN10025-5 S355K2W Pressure Vessel Steel plate

Main Application:

EN10025-5 S355K2W Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel, Boiler, storage Tanks and Heat Exchanger in Oil,Gas Project

Supply S355K2W (1.8967) EN10025-5 steel plate

Grade :

S355K2W (1.8967) wuyang steel, shougang steel, xinyu steel

Specification:

Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm

Standard:

EN 10025 -5 : 2004   Technical delivery conditions for structural steel with improved atmospheric corrosion resistance

Approval By Third Party

ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE

Classification:

structural steel with improved atmospheric corrosion resistance

Steel name:

EN10025-5 S355K2W Boiler steel plate,EN10025-5 S355K2W Pressure Vessel Steel plate, EN10025-5 S355K2W Storage Tanks Steel plate. EN10025-5 S355K2W Heat Exchanger Steel Plate .

Grade

Mechanical Property

Tensile Strength(MPa)

Yield Strength(MPa)

% Elongation in 2 in.(50mm) min

Impacting Test  Temperature(°C)

EN10025-5 S355K2W

510

355

16

+20,0,-20

Chemical composition % of the Product analysis of grade S355K2W   (1.8967)

FN = rimming steels not permitted; FF = fully killed steel (see 6.2.2).

For long products the P and S content can be 0,005 % higher.

The steels shall contain at least one of the following elements: Al total ≥ 0,020 %, Nb: 0,015 - 0,060 %, V: 0,02 - 0,12 %, Ti: 0,02 - 0,10 %. If these elements are used in combination, at least one of them shall be present with the minimum content indicated.

 It is permissible to exceed the specified values provided that for each increase of 0,001 % N the P max. content will be reduced by 0,005 %; the N content of the ladle analysis, however, shall not be more than 0,012 %.

The steels may show a Ni content of max. 0,65 %.

The steels may contain max. 0,30 % Mo and max. 0,15 % Zr.

The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0,020 % or if sufficient other N binding elements are present. The N binding elements shall be mentioned in the inspection document

 

Method of deoxidation

C

Si

Mn

P

S

Cr

N

Cu

FF

max 0.19

max 0.55

0,45 - 1,60

max. 0,035

0,035

0,35 - 0,85

0,010

0,20 - 0,60

Shanghai Katalor Industry Co., Ltd Is specialized in the production of steel plate, steel pipe, steel bar, it is located in Shanghai, with advanced technology and services, if you need  EN10025-5 S355K2W steel, please give us a message.

HOME | ABOUT US | PRODUCT | NEWS | CONTACT US | katalor
Copyright © 2014 by Shanghai Katalor Enterprises Co., Ltd All rights reserved