Shipyards use shipbuilding steel plate ASTM A131 Grade AH36 to construct tanks and vessels in ships cause A131 Grade AH36 ship plate owned the higher yield strength and tensile strength. Katalor group owned tens of stock warehouses in port cities in China,there are thousands tons of shipbuilding steel plate and sheet and angles and build flats in stock which are ready to ship on board.Different thicknesses,width mainly in 2000-2500mm,length mainly in 6000-12000mm for steel plate A131 Grade AH36.
A131 AH36 Grade Ship Steel Mechanical Properties:
|
|
Thickness(mm) |
MinYield(Mpa) |
Tensile(Mpa) |
Elongation (%) |
Min Impact Energy |
|
|
A131 AH36 |
8mm-50mm |
Min 355Mpa |
490-620Mpa |
21% |
-0 |
34J |
|
51mm-70mm |
Min 355Mpa |
490-620Mpa |
21% |
-0 |
41J |
|
|
71mm-100mm |
Min 355Mpa |
490-620Mpa |
21% |
-0 |
50J |
|
|
The min impact energy is longitudinal energy |
||||||
AH36 steel Chemical Composition %:
|
|
C max |
Si max |
Mn |
P max |
S max |
Al min |
Ti max |
Cu max |
Cr |
Ni |
Mo |
Nb |
V |
|
AH36 |
0.18 |
0.50 |
0.90-1.60 |
0.035 |
0.035 |
0.015 |
0.02 |
0.35 |
0.20 |
0.40 |
0.08 |
0.02-0.05 |
0.05-0.10 |
Shanghai Katalor Industry Co., Ltd supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry, such as ASTM A131 Grade A, A131 Grade B, A131 Grade D, A131 Grade E and higher ship steel grade A131 Grade DH36, A131 Grade EH36 and A131 Grade FH36. Please send your needed sizes and steel grades to us if you demand of stock of shipbuilding steel plate.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:info@katalor.com
Phone:0086-18317160019
