Katalor Steel stocks A709 steel plate Grade 36, 50 and 50W. These grades are often specified with charpy tests referencing the specific zone, or climatic region, in which the bridge will be in use.
A709 grade 36 low alloy steel plate is mainly used for built steel bridges.HSLA steel plate A709Gr.36 owned minimum yield strength at 250Mpa and tensile strength between 400 and 550 Mpa.
Round bar:Diameter : 1mm-2000mm
Square bar:Size: 50mm * 50mm-600mm *600mm
Plate steel/flat bar:Size: Thickness: 0.1mm-800mm Width: 10mm to 1500mm
Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
Forging/hot rolling/ extrusion of steel.
|
Grade |
Thickness |
Yield |
Tensile |
Elongation |
Charpy V Impact Test |
||
|
Degree |
Energy 1 |
Energy 2 |
|||||
|
A709Gr.36 |
mm |
Min Mpa |
Mpa |
Min % |
- |
J |
J |
|
5＜t≤300 |
250 |
400-550 |
20 |
|
|
||
Chemical composition for A709Gr36 low alloy steel (Heat Analysis Max%)
|
Main chemical elements composition of A709Gr36 |
||||||
|
Thickness(mm) |
C |
Si |
Mn |
P |
S |
Cu (Min) |
|
T≤20 |
0.25 |
0.40 |
... |
0.04 |
0.05 |
0.20 |
|
20<T≤40 |
0.80-1.20 |
|||||
|
40<T≤65 |
0.26 |
0.15-0.40 |
||||
|
65<T |
0.27 |
0.85-1.20 |
||||
ASTM A709/A709M is Standard Specification for Structural Steel for Bridges.Unitedsteel mill is specialized in supplying ASTM A709 steel plate in A709 Grade 36.
Shanghai Katalor Industry Co., Ltd is committed to steel processing and export. We have the most comprehensive service. One package service will be offered, including cutting,welding, drilling, shot blast cleaning, derusting, painting, galvanized, etc, our service will be around your requirement and ensure the perfect service.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:info@katalor.com
Skype:katalor
Phone:0086-18317160019
