ASTM A285 Grade C is a low to intermediate yield steel used in the fabrication of carbon steel pressure vessels and boilers.
Under ASME SA 285/SA 285M,boiler steel plate SA285 Grade C is equal to steel grade ASTM A285 Grade C pressure vessel steel plate.The main differnence for these three carbon steel grades of SA285 Grade A,SA285 Grade B and SA285 Grade C is their yield strength and tensile strength. For pressure vessel steel plate SA285 Grade A,minimum yield strength shall be 165 Mpa and 24Ksi,and SA285 Grade B pressure vessel steel plate owned the minimum yield strength at 185 Mpa and 27 Ksi,then pressure vessel steel plate SA285 Grade C owned the highest yield among them,it shall be above 205 Mpa and 30 Ksi.So steel plate SA285 Grade C is the most common used in the industry.
|
Main chemical elements composition of A285 Grade C
|
|
C
|
Si
|
Mn
|
P
|
S
|
|
0.28
|
0.08-0.45
|
0.98
|
0.035
|
0.035
|
Mechnical property for A285 Grade C boiler steel:
|
Yield strength (≥Mpa)
|
Tensile strength (Mpa)
|
Elongation in ≥,%
|
|
205
|
380-515
|
200mm
|
50mm
|
|
23
|
27
|
The steel is intended for use in standard tanks and boilers rather than high pressurised vessels due to the steels lower yield strength.
ASTM A285 Grade C is supplied throughout the oil gas and petrochemical industry, and Masteel UK Limited hold this material in stock.
ASTM A285/A285M A285GrC steel Size:
Thickness: 8mm to 200mm
Width: 1500mm to 4200mm
Length: 4000mm to 18000mm
Shanghai Katalor Industry Co., Ltd Is specialized in the production of steel plate, steel pipe, steel bar, it is located in Shanghai, with advanced technology and services, if you need ASTM A285 Grade C steel, please give us a message.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:info@katalor.com
Skype:katalor
Phone:0086-18317160019
