ST 44-3 steel plate, under DIN17100 standard ST 44-3 steel plate, under DIN17100 standard, we can regard ST 44-3 steel plate as common carbon structural steel. ST 44-3 steel plate is one mainly of Carbon structural steel.Material ST 44-3 we can offer you is super heavy steel plate , and the thickness can reach as much as 600mm.
DIN17100 St44-3 structural steel plate is a kind steel grade in steel specification DIN 17100. For the different thickness of steel plate St44-3, there is a little difference in the minimum yield strength and tensile strength values. Tensile strength shall be within 430 up to 580 Mpa for the thickness belows 3mm, and tensile strength of steel plate St44-3 shall be within 410 up to 540 Mpa for the thickness equal and above 3mm.
Chemical composition % of the Product analysis of grade ST44-3 (1.0144)
|
C |
N |
P |
S |
|||||
|
< 16 |
16-30 |
30-40 |
40-63 |
63-100 |
>100 |
|||
|
0.23 |
0.23 |
0.23 |
0.23 |
0.23 |
- |
- |
0.050 |
0.050 |
Mechanical property for St44-3 Structural steel:
|
Thickness (mm) |
|||||
|
St44-3 |
≤ 16 |
> 16 ≤ 40 |
> 40 ≤ 63 |
> 63 ≤ 80 |
> 80 |
|
Yield strength (≥Mpa) |
275 |
265 |
255 |
245 |
235 |
|
|
< 3 |
≥ 3 ≤ 100 |
> 100 |
||
|
Tensile strength (Mpa) |
430-580 |
410-540 |
410-540 |
||
Shanghai Katalor provides high quality St44-3 steel plate to you, we have a large number of St44-3 steel plate inventory as China steel exporters, if you want to know more about the St44-3 steel plate, welcome to inquire at any time.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:info@katalor.com
Phone:0086-18317160019
