St52-3 steel plate is one mainly of low alloy steel, St52-3 steel plate is alloy steel under the DIN17100 standard which is equal to DIN17100:St52-3,JIS:SS490/SM490A,BS:50B and UNI7070:Fe510B
St52-3 steel plate/sheet is in DIN17100 standard.The equal material of St52-3 is: DIN17100:1990 FE 510 B, EN 10025-2 S355JR,ASTM A572GR50, JIS SS490/SM490A,NFA 35-501 E36-2, BS1449 50B,UNI7070 FE 510 B.
|
Comparison of steel grades |
||
|
DIN17100:1990 |
FE 510 B |
|
|
EN 10025-2 |
S355JR |
|
|
ASTM |
A572GR50 |
|
|
JIS |
SS490/SM490A |
|
|
NFA 35-501 |
E36-2 |
|
|
BS1449 |
50B |
|
|
UNI7070 |
FE 510 B |
|
DIN17100 St52-3 steel Chemical Composition % :
Main chemical composition in DIN17100 St52-3 steel : Silicium max 0.55 Manganese max 1.6, Phosphorus max 0.045,Sulphur max 0.045. More detailed information, please refer to the flowing table:
|
Chemical elements |
C≤ 16mm |
C>16mm |
Si |
Mn |
P |
S |
|
%,by mass |
0.24 |
0.24 |
0.55 |
1.60 |
0.045 |
0.045 |
DIN17100 St52-3 steel Mechanical Properties
DIN17100 St52-3 steel plate/sheet for low alloy steels, This kind of steel has very wide use. Because of the low Carbon content and without alloy element, carbon structural steel has the proper tensile strength, good toughness, plasticity,processing property. More detailed information about DIN17100 St52-3 steel Mechanical Properties , please refer to the following table:
|
Nominal thickness (mm) |
to 3 |
3-100 |
100- |
|
Minimum yield strength (MPa) |
510-680 |
490-630 |
- |
|
Nominal thickness (mm) |
To 16 |
16-40 |
40-63 |
63-80 |
80-100 |
|
Tensile strength (MPa) |
355 |
345 |
335 |
325 |
315 |
|
Nominal thickness (mm) |
0.5-1 |
1-1.5 |
1.5-2 |
2-2.5 |
2.5-3 |
3-40 |
40-63 |
63-100 |
|
Minimum elongation |
14/12 |
15/13 |
16/14 |
17/15 |
18/16 |
22/20 |
21/19 |
20/18 |
Shanghai Katalor Industry Co., Ltd Is specialized in the production of steel plate, steel pipe, steel bar, it is located in Shanghai, with advanced technology and services, if you need DIN 17100 St 52-3 steel, please give us a message.
