EN 10025 S275ML steel material can be produced into S275ML steel sheet, S275ML steel pipe S275ML steel plate , S275ML flat bar
EN 10025-4-S275ML is a kind of Non-alloyed structural steel plate, en 10025-4 is intended for structural steel, weldable fine grain, and thermomechanically rolled.S means the structural steel, M means the delivery condition.
Capital letter L for the quality with specified minimum values of values of impact energy at temperature not lower than -50 degree.
Steel Standard:EN 10025-4
Rolling Type:Structural steel plate,low alloy steel plate
Thickness:6mm-500mm
Width:1500mm-4200mm
Length:3000mm-18000mm
S275ML Mechanical properties at ambient temperature for thermo mechanical rolled steel
|
Grade |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Impact Energy |
|
(mm) |
MPa (min) |
MPa |
% (min) |
(KV J) (min) |
|
|
|
|
|
|
-50 degree |
|
|
S275ML |
≤ 16 |
275 |
370-530 |
24 |
27 |
|
16> to ≤40 |
265 |
370-530 |
24 |
27 |
|
|
40> to ≤63 |
255 |
350-510 |
24 |
27 |
|
|
63> to ≤80 |
245 |
350-510 |
24 |
27 |
|
|
80> to ≤100 |
245 |
350-510 |
24 |
27 |
|
|
100> to ≤120 |
240 |
350-510 |
24 |
27 |
Chemical composition for S275ML Structural steel (Heat Analysis Max%)
|
C max |
Si max |
Mn max |
P max |
S max |
Nb max |
V max |
Al max |
Ti max |
Cr max |
Ni max |
Mo max |
Cu max |
N max |
|
0.13 |
0.50 |
1.50 |
0.025 |
0.020 |
0.05 |
0.08 |
0.02 |
0.05 |
0.30 |
0.30 |
0.10 |
0.55 |
0.015 |
Katalor have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find S275ML steel supplier, S275ML steel manufacturer, S275ML steel exporter, please contact JW steel’s sales team. We will give you the S275ML competitive price, S275ML good quality and best service from us.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:info@katalor.com
Phone:0086-18317160019
