Shanghai Katalor Enterprises Co., Ltd
TEL : 0086-18317160019   SKYPE :SHANGHAI.KATALOR  E-mail : info@katalor.com
Further information
You need Further information or have question
0086-21-61182423
0086-21-61182424
info@katalor.com
Home > news > Views
EN 10025-6 grade S890QL, S890QL steel, S890QL steel sheet

EN 10025-6 grade S890QL, S890QL steel, S890QL steel sheet

Posted:2014-11-30 10:59:06
 
S890QL is a high strength and toughness steel in min yield strength 890Mpa thickness under 50mm, -40 temperature impact energy 30J in quenched and tempered delivery station.
High yield strength steel plate S890QL under EN 10025-6 owned the minimum yield strength at 890 Mpa and tensile strength within 940-1100 Mpa.
The necessary technical requirement when rolling steel plate S890QL contains quenching and tempering heat treatment,low temperature impacting test under minus 40 centigrade.The additional technical has Ultrasonic examination.
 
Mechnical property for S890QL High strength steel:

Thickness (mm)

S890QL

≥ 3 ≤ 50

> 50 ≤ 100

> 100

Yield strength (≥Mpa)

890

830

830

Tensile strength (Mpa)

940-1100

880-1100

880-1100

 
Chemical composition % of the Product analysis of steel grade S890QL (1.8983)
Nominal thickness = 50(mm) CEV max = 0.72
Nominal thickness from 50 to 100 (mm) CEV max = 0.82
Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum
values given in order to obtain the specified properties
There shall be at least 0,010% of a grain-refining element present. Aluminium is also one of these elements. The minimum content of 0,010 % applies to soluble aluminium, this value is regarded as attained if the total aluminium content is at least 0,013 %; in case of dispute the soluble aluminium content shall be determined.

C

Si

Mn

Ni

P

S

Cr

Mo

V

Nb

Cu

Ni

B

N

Zr

Ti

0.22

0.86

1.8

0.8

0.025

0.012

1.6

0.74

0.14

0.07

0.55

2.1

0.006

0.016

0.17

0.07

 
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S460Q, S460QL, S460QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL1 and S890QL steel plate grade.
Shanghai Katalor Industry Co., Ltd Is specialized in the production of steel plate, steel pipe, steel bar, it is located in Shanghai, with advanced technology and services, if you need EN 10025-6 steel, please give us a message.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:info@katalor.com
Skype:katalor
Phone:0086-18317160019
HOME | ABOUT US | PRODUCT | NEWS | CONTACT US | katalor
Copyright © 2014-2024 by Shanghai Katalor Enterprises Co., Ltd All rights reserved