S355MC is a German low carbon alloy steel, comprehensive performance, low temperature performance, cold stamping performance, welding performance and cutting performance. Widely used in bridges, vehicles, ships, construction, pressure vessels. The yield value is about 355MPa. And the yield value decreases as the thickness of the material increases.
S355MC Chemical composition:
| Grade |
The Element Max (%) |
||||
|
S355MC |
C |
Si |
Mn |
P |
S |
|
≤0.12 |
≤0.50 |
≤1.50 |
≤0.025 |
≤0.020 |
|
|
Al |
Nb |
V |
Ti |
|
|
|
≥0.015 |
≤0.09 |
≤0.20 |
0.15 |
|
|
S355MC Physical properties:
| Grade |
Tensile(Mpa) |
Yield (Min Mpa) |
Elonggation |
Thickness |
|
S355MC |
430-550 |
≥355 |
≥19 |
<3.0 |
|
≥23 |
≥3.0 |
S355MC Specification:
Thickness: 2mm--16mm
Width: 900mm--1850mm
Length: 2000mm to 12000mm
According to customer requirements
S355MC Welding：
These steel grades can be welded bothmanually and using automatic equipment by means of all electrical welding processes provided the general technical rules are
observed. No major hardness increases appear in the heat-affected zone. Preheating
is not necessary under normal welding conditions and down to workpiece temperatures of +5 °C. Below +5 °C, pre-heating to 150 °C is recommended. The welding wires and electrodes approved in the respective strength category must be used as filler metals. In addition to this, the general meaning of the detailed information provided in ‘Stahl-Eisen-Werkstoffblatt’ (Iron and steel material sheet) 088 must be observed.
Shanghai Katalor Enterprises Co., Ltd. is a professional manufacturer and supplier of steel, we can not only produce S355MC steel plate, S355MC steel pipe and steel sections and other large steel, but also to provide customers with S355MC steel parts. If you need, please contact us immediately.
Phone: 0086-18317160019
TEL: 0086-21-61182423
Fax: 0086-21-61182425
E-mail: info@katalor.com
Skype: shanghai.katalor
Address : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
