Pressure vessel steel plate P460Q shall be rolling completely according to EN 10028-6 steel standard.These requirements outline the testing and retesting methods and procedures,permissible variations in dimensions and weight, quality and repair of defects,marking,loading,etc.
In addition to the basic requirements of this specification for steel plate p460q ,certain supplementary requirements are available when additional control, testing, or examination is required to meet end use requirements. These include:1 Vacuum treatment,2 Additional or special tension testing,3 Impact testing, 4 Nondestructive examination.
EN10028-6 P460Q Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel, Boiler, Storage Tanks and Heat Exchanger in Oil, Gas Project.
P460Q steel plate specification:
Steel Grade: P460Q Steel Standard: EN10028-6
Thickness:6mm-450mm, Width:1200mm-4200mm, Length:3000mm-18000mm
P460Q Mechanical properties
|
Grade |
Type |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Impact Energy |
|
(mm) |
MPa (min) |
MPa |
% (min) |
(KV J) (min) |
||
|
|
|
|
|
-20 degree |
||
|
P460Q |
+QT |
≤ 50 |
460 |
550-720 |
19 |
27 |
|
50to ≤100 |
440 |
550-720 |
19 |
27 |
||
|
100o ≤150 |
400 |
500-670 |
19 |
27 |
Chemical composition for P460Q pressure vessel steel (Heat Analysis Max%)
|
C |
Si |
Mn |
P |
S |
B |
N |
Cr |
|
0.18 |
0.50 |
1.70 |
0.025 |
0.015 |
0.005 |
0.015 |
0.50 |
|
Cu |
Mo |
Nb |
Ni |
Ti |
V |
Zr |
|
|
0.30 |
0.50 |
0.05 |
1.00 |
0.03 |
0.08 |
0.05 |
|
If you are interesting in our P460Q steel products, please feel free to contact us. Your enquiry will be highly appreciated, and we will give you a quotation upon receiving your detailed requirements.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:info@katalor.com
Phone:0086-18317160019
