P355QL1 is a kind of pressure vessel steel under the standard of EN 10028-6,with the minimum yield strength at 355 Mpa, The steel shall be done impacting test at minus 40 centi degree low temperature.
| C |
Si |
Mn |
P |
S |
B |
N |
Cr |
|
0.16 |
0.40 |
1.50 |
0.020 |
0.010 |
0.005 |
0.015 |
0.30 |
|
Cu |
Mo |
Nb |
Ni |
Ti |
V |
Zr |
|
|
0.30 |
0.25 |
0.05 |
0.50 |
0.03 |
0.06 |
0.05 |
|
| Grade |
Thickness |
Yield |
Tensile |
Elongation |
|
P355QL1 |
mm |
Min Mpa |
Mpa |
Min % |
|
6-50 |
355 |
490-630 |
22% |
|
|
50-100 |
335 |
490-630 |
22% |
|
|
100-150 |
315 |
450-590 |
22% |
P355QL1 pressure vessel steel specification:
Thickness : 1.2mm-680mm
Width : 1000mm-4000mm
Length : 1000mm-18000mm
P355QL1 Additional technical services:
P355QL1 boiler steel plate from Katalor which including Heat treatment (Normalized, TMCP, Quenched and Tempered, N+T), Z-test (Z15,Z25,Z35),Ultrasonic Examination, Low temperature impacting test, DWTT,PWHT and cutting & welding into special pieces for end users.
Shanghai Katalor Enterprises has supported constructing big infrastructural projects oversea. We export P355QL1 to Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea and so on. If you have any need of P355QL1, please do not hesitate to contact us by email info@katalor.com, we will try our best to help you!
Phone: 0086-18317160019
TEL: 0086-21-61182423
Fax: 0086-21-61182425
E-mail: info@katalor.com
Skype: shanghai.katalor
Address : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
